The first thing that will captivate you about the Noisy Cricket Mech Mod and Indestructible RDA is their appearance. This powerful combination requires some time to get setup, but as soon as you get it working, it offers amazing performance. Its stylish design, airflow, light hold and impressive cloud production make it worth considering. In this review, we will take a closer look at the Noisy Cricket Mech Mod & Indestructible RDA. Let’s start with the specifications.
WISMEC Noisy Cricket Mechanical Mod Specifications
- 510 Threaded Connection
- It uses two 18650 Lithium IMR Batteries
- Suggested Resistance for Atomizers: 0.25 to 0.5 ohms
- Aluminium Allow Build
- Surface Brushed Treatment
- Top, Threaded Firing Button
- High-Power Output
- Jay-Bo Design
- SMPL Style Firing Button
- The lower battery lid has air holes and it can be removed
- There is a threaded connection and firing button that can also be removed for battery replacement
- Batteries used in a Series Circuit
- Dimensions: 79mm x 40mm x 22mm
WISMEC Indestructible RDA Specifications
- 510 Threaded Connection
- 301 Steel Build
- 22mm Diameter
- Non Rotating Central Positive Connection Post
- Peek Insulators
- 3 Posts, Positive Post has Two Hex Screws
- Suggested Resistance for Coil Build: 0.25 to 0.5 ohm
- 6 Air Holes, 3 “Positioning” Holes: 9 in total
- 2 Negative Posts use Two Phillips Head Screws
- Unique Open Slot Wire Terminal Post Holes
- Additional Adjustable Top Air Flow
- 3-Piece Mouthpiece Assembly for Hidden Air Flow
- Jay-Bo Design
- It’s 31mm tall
- The mouth piece is 11mm
- It is compatible with Single Coil Advanced Builds/Single Clapton Coil
Getting started
The combination of the Noisy Cricket Mod and the WISMEC Indestructible RDA is fantastic. The RDA has a remarkable air flow and the mod offers a lot of power, in spite of the fact that it is very light. Once it is working as it should, you won’t notice any issues. However, putting it together and ensuring that it is working is not that simple. If you have experience building advanced coils and prefer single coil setups, this is an ideal solution for you since the mech mod is rated for 0.25 to 0.5 Ohm builds. One thing that many people may not like is the battery installation, but the truth is this depends on the batteries that you use.
It can be difficult to tighten smaller wired coils with the central post, but this another small issue. The main problem with this combination of the RDA WISMEC Noisy Cricket Mod and the WISMEC Indestructible RDA is connectivity. Although the issue can be resolved, you will need to find out why the setup doesn’t activate. It may be that teh central post is not connecting to its battery. This can be easily fixed as all you need to do is to turn the central post screw of the RDA for one rotation to make sure that it can reach the battery. The downside is that adjusting a new item of this kind is not something that builders may want to do. Although having to play around with the setup may seem to be a major issue, it is not really a big deal.
Carrying out a small adjustment like the one mentioned above, allows the setup to work correctly. Once the combination is working as it should, you will be impressed with the results. As you continue using it, you won’t need to re-adjust the positive connection post of the RDA. In the end, the advantages of using the combination of the WISMEC Noisy Cricket Mod and the WISMEC Indestructible RDA surpass the downsides. Both the mod and the RDA have a sleek design and they offer an enjoyable experience. Usually, mechanical mods of this kind tend to have a box-like shape, it is round, smooth and it has a convenient size. One thing that should be noted is that the firing pen is quite delicate. It works well and you won’t need to apply too much force when you press it down. Keep in mind that for safety reasons, it is advisable to remove one or both batteries in order to install coils while the RDA is already screwed onto the top of the mod.
The design of the WISMEC Indestructibel RDA stands apart from what other RDAs offer. It doesn’t feed air through the bottom, but the large air holes on the side work well. The tube of the RDA has 9 holes, so if you are using a two coil build, you can use three of those holes for lining and the rest with its coils. You can install one single coil and use the six matching air holes to line the other three withe the location of the coil. It is also possible to install one large coil with the post design, but it is important to keep in mind that this is a mechanical setup. Make sire that you check the coil builds with an ohms reader or regulated mod to verify the safety of the amperage draw when you use a mechanical mod. Since this mod takes two 18650 sized Lithium IMR batteries, the majority of non-advanced coils won’t be safe for use with it.
The post holes also stand out thanks to their innovative design. However, when you are building coils for the RDA, you will need to use a Phillips screwdriver and a hexagonal head screwdriver, even if you just one to install a single coil. If you have previous experience building coils, this won’t be a big deal and it is likely that you have these two kinds of screwdrivers at home already. Still, the post holes can be difficult to manage, but they are perfect for coils that have a larger diameter. While it may take some time to get the setup ready and the process is not that easy, once it is done, you will lobe the design and feel that this combination can offer.
Another feature that deserves to be mentioned is the mouthpiece of the WISMEC Indestructible RDA. Although the three disks included can be a bit confusing since they are threaded and come with beautifully machined clandestine holes, assembling the mouthpiece part of the RDA is not too difficult. With this mouthpiece, you have flexibility to choose how much top air flow you want. The open/close holes can be secured via a threaded connection. The mouthpiece is wide and it features a slanted arc that makes it more comfortable. In the end, while the assembly may not be that easy, once it is don, you will love the Noisy Cricket Indestructible combination and the way that it works. It offers a fantastic vaping experience thanks to its light, innovative design. It can be used by less experienced vapers, but it is important that you find out more about battery safety and coil building before using this combination.
Conclusion
The Cricket Mech Mod & Indestructible RDA setup is a great choice for those who enjoy coil building and mechanical mod vaping. While the Indestructible RDA can be challenging when you are installing cols, it works well for single coil builds, particularly for advanced coil builds like Clapton Coils, staggered fused Clapton coils and more. Although getting the combination together and ready to work can be slightly difficult, once it is done, it delivers an amazing vaping experience. It is powerful, convenient, light and it gives you flexibility when managing the air flow.